Table of Contents

Routine Chores

Refilling ink Reservoirs
Changing Ink Types
Removing and Storing Ink Cartridges
Replacing Ink Reservoirs
Installing New Cartridges
Purging Ink Delivery Lines
Replace Service Station Wipers

Periodic Maintenance

Periodic Maintainance Chart

As Required

Cleaning Ink Spills
Cleaning the Keypad
Cleaning the Cartridge Inkjet Plate
Clean and inspect the Service Station
Cleaning the Platen Vaccuum Holes
Cleaning the Pinch Rollers and Lower Drive Rollers
Maintaining the NovaPrime

Daily

Clean and inspect the Service Station
Cleaning the Platen Vaccuum Holes

Weekly

Cleaning the Slide Shaft
Cleaning the Encoder Strip
Cleaning the Trailing Cable and Support Bracket
Cleaning the Carriage Flex Cables and Cartridge Electrical Connection Area

Monthly or longer

Cleaning the External Areas
Cleaning the Pinch Rollers and Lower Drive Rollers
Cleaning the Encoder Sensor

Repacking the Printer

Perparing the Printer for Transport

Printer Info

Accessing the Printer Information
 

Graphic Trouble -shooting

This section shows examples of bad images. Match your condition to one of the examples and it will describe some possible causes and ways to correct it.

Misfiring Cartridge Jet
Dirty Cartridge or Service Station
Bad Parallel Cable
Non-IEEE 1284 Parallel Cable Issue
Bad Auto-Wipe Condition
Raster Image Processor (RIP) Problem
RIP Problem 2
RIP Problem 3
RIP Problem 4
Microbanding
Ink Starvation
Incorrect Deadband Calibration
Ghosting (Parasitic Suppression)
Using Non-Adobe Fonts
Dirty Encoder Strip
Bad Media due to Humidity/Water Damage
Scraping Cartridge Jetplate
Ink Dropout